Description
Key Features
- Easy to Clean - Can be washed with just water or 15% alcohol.
- Low viscosity with low peel force - Simple has the lowest peel force and allows for high-speed printing and for large printers.
- Great resolution and can work great on large printers. It is 8K capable.
- Low odor in the 3D printing process and will not be yellowish like most clear resins.
- Transparency - Simple Clear can be restored to full transparency with minimal postprocessing.
Application:
- Model making
- Optical and clear design.
- Easy to DYE for DIY projects
- High-speed printing
Estimate shipping
Please note
Estimate shipping will be calculated based on the products in the cart.
Color select
Siraya Tech Washable Resin - Simple comes in four color options.

Simple Clear

Simple Smoky Black
3D Model by いよべい@WF2023夏

Simple Grey
3D Model by Lord of the Print

Simple Grey V2
Tired of smelling high concentration alcohol?
We developed Simple Resin because we wanted to make a resin that is even easier to print and so easy to wash that it uses low-concentration (10-15%) alcohol.
Simple resin prints very well and has a high printing success rate, simplifying your printing process for beginners.
Simple Properties
Shore Hardness 75D
Tensile Stress at Break 25 MPa
IZOD Impact 18 Notched, J/m
HDT at 0.455 MPa 60℃
Elongation at Break 4%
Young's Modulus 650MPa

What are the similarities and differences between Simple and Simple V2
Similarities
- Easy to Clean & Low Odor
- The resin has good fluidity and is easily compatible with large printing machines, such as Eleoo Jupiter, Geopoly Forge and ect.
- Washable resin, better results can be obtained by cleaning with 10% -15% alcohol.
- The printing success rate is high, very suitable for novices and teaching printing.
Differences
- Usually, the water-washed resin cannot be soaked in water for too long as the water-washed resin will be dissolved by water, which will cause the surface of the model to crack. Simple V2 solves this problem and will not cause cracks when soaked in water.
- Simple V2 is compatible with Siraya Tech platinum silicone Defiant 15/25, while Simple is not.
Super Easy to Print and Clean
Siraya Tech Simple 3D Printing Resin is an upgraded and developed UV resin based on Siraya tech Fast ABS-Like resin, which is easier to clean. Cleans easily with just 15% alcohol. Better than the common washing effect on the market.
And it is easier to print than Fast resin. Siraya Tech Simple resin has fast printing speed, good resolution, and is very convenient to use and dye, suitable for new users.
Low Odor and Tough
Siraya Tech Simple resin produces little odor in the 3D printing process and is not unpleasant. And our Siraya Tech 3D printing resin will not be yellowish like most clear resins, making every printed model crystal clear.
And it is not so brittle and has an excellent combination of stiffness and toughness, making it more durable to drop, damage, and usability, and not fragile. This Siraya Tech rapid resin is strong enough to withstand that accidental fall from time to time.
How to make Siraya Tech simple resin more clear?
Step 1: Clean the Prints and Dry the surface
- Clean the prints made with Simple Clear resin using a mild soap and water solution. Rinse them thoroughly with water and allow them to dry completely.
- Use a hair dryer to remove any water droplets on the surface until it is completely dry.
Step 2: Apply a Water-Based Coating
- Apply a thin layer of water-based coating with a spray gun. Make sure to apply it thinly and evenly. Allow it to dry naturally at room temperature for about 2 minutes.
- Repeat the coating process, applying thinly every 2 minutes, and then let it dry naturally at room temperature.
- We repeated this operation about three times, please see the pic for the result below.
Step 3: Inspect the Prints
- Inspect the prints to ensure that they are transparent to your liking. If you are satisfied with the level of transparency, your prints are now ready to use.



Simple VS other water washable resin test
As we all know, the water-washed resin can be washed with water because the water-washable resin in the liquid state is better compatible with water, so it is easier to clean when washing with water.

Simple Grey introduction
