Rebound PEBA 85A Filament TDS
Download PDF Version - PEBA 85A Filament TDS
1. Product Introduction
Rebound PEBA 85A is engineered for parts that require excellent flexibility, high rebound, and durability, offering better low-temperature performance and chemical resistance than typical TPU materials.
2. Specifications and Property Data
|
Specifications |
Data |
|
Name |
Rebound PEBA 85A |
|
Color |
Black |
|
SKU |
ST3030 |
|
Net weight (KG) |
0.8 |
|
Gross weight (KG) |
1.3 |
|
Package Dimensions (cm) |
21*21*7.5 |
|
Diameter (mm) |
1.75±0.03 |
|
Material Type |
Polyether Block Amide (PA12 Elastomer) |
|
Filament Density (g/cm3) |
~1 |
|
Mechanical Properties |
Unannealed |
Method |
|
Tensile Stress at Break (X-Y) |
30 MPa |
ASTM D638 |
|
Young’s Modulus (X-Y) |
90 MPa |
ASTM D638 |
|
Elongation at Break (X-Y) |
905 % |
ASTM D638 |
|
Tensile Strength (X-Y) |
~28 MPa |
ASTM D412 |
|
Tensile stress at 100% |
6.7 MPa |
ASTM D412 |
|
Tensile stress at 100% |
7.6 MPa |
ASTM D412 |
|
Tensile stress at 100% |
8.5 MPa |
ASTM D412 |
|
Other Properties |
Unannealed |
Method |
|
Vicat softening temperature |
91.5 ℃ |
ISO 306 |
|
Shore Hardness |
85 A |
ISO 7619 |
|
Melting Point |
235 ℃ |
ASTM D3418 |
|
Water Absorption |
1.69 |
ISO 62 Method 1 |
|
Bayshore Rebound |
62% |
ASTM D2632 |
3. Workflow
Read Before Printing
|
Drying |
Dry the filament thoroughly before every print. Use a dedicated filament dryer or convection oven at 70-75°C for 4-6 hours. |
|
Nozzle |
≥ 0.2 mm (≥ 0.4mm is recommended for ease of use) |
|
Enclosure |
Recommended |
|
Extruder |
Direct drive extruders are generally recommended for flexible filaments. |
|
Build Surface |
Glass, PEI Film, or PC Film |
|
AMS |
Incompatible |
|
Best practices when printing |
It is recommended to put the filament into a dry box (humidity below 15%) immediately after opening for printing. |
|
Storage |
When not in use, store the filament back in the original aluminum foil bag, sealed tightly, ideally with desiccant packs. |
Recommend Print Setting
|
Nozzle Temp |
230-260°C |
|
Build Plate Temp |
60-100°C. |
|
Cooling Fan |
50-100% |
|
Print Speed |
30-120 mm/s |
|
Retraction Distance |
0.4-1 mm |
|
Retraction Speed |
1800-3600 mm/min |
Troubleshooting Common Issues
|
Stringing / Oozing / Bubbles |
|
|
Rough Surface Quality |
Also a primary symptom of moisture. Dry the filament. |
|
Poor Bed Adhesion |
|
|
Weak Layer Adhesion |
|