Hey There, 3D Printing Enthusiasts! Let's Talk About Fast Tough Navy Grey

皆さん、こんにちは。Siraya Techの創設者、マークです。最新作のFast Tough Navy Grey樹脂についてお話しできることを大変嬉しく思っています。これは単なる新製品発表ではありません。皆様からのフィードバックと、当社の材料科学者たちの努力の結晶です。

ファストネイビーグレーの進化

Fast Navy Greyは長年、特に卓上ゲーム愛好家の間で最も人気のある樹脂の一つです。しかしながら、より耐衝撃性の高い樹脂を求める声を多くいただいており、多くのお客様がFast Navy GreyにTenacious Clearを10~15%混ぜることで、見た目と耐久性の完璧なバランスを実現されています。では、もうその必要がなくなったらどうでしょうか?

高速で丈夫なネイビーグレーのABSライクな樹脂アップグレード樹脂ミックス

ファストタフネイビーグレーのご紹介

ファストタフグレー(ファストグレーのより丈夫なバージョン)と同様に、ファストタフネイビーグレーも新たに登場します。その特徴は次のとおりです。

  • 素晴らしい色彩を維持:Fast Navy Grey の独特のマットな外観はそのままです。

  • 耐衝撃性の向上: 細部にまで妥協することなく、これまで以上に頑丈になりました。

3Dプリンター用Fast Toughネイビーグレーのより丈夫なABSのような3Dプリント樹脂
  • 高速で簡単な印刷: 慣れ親しんだ高速印刷時間を維持しています。

Elegoo Saturn 4 超高速で簡単な印刷
  • 低臭性:作業スペースが狭い場合に最適です。

  • 洗浄が簡単:他の樹脂と同様に、お手入れも簡単です。

  • シームレスなワークフロー統合: 露出設定はオリジナルの Fast Navy Grey に非常に近いため、最小限の調整で既存のプロセスに組み込むことができます。

今すぐ入手!

現在、Fast Tough Navy Greyの発売記念セールを実施中です。こちらからご注文いただけます: Fast Tough Navy Grey

最新のプロファイルが必要ですか?こちらからダウンロードしてください: 最新の印刷プロファイルをダウンロード

共に革新を続けましょう

ファストタフ ネイビーグレーをお使いいただいた感想をぜひお聞かせください。ぜひメッセージをお送りください。プリントした作品や、改善のためのご提案など、何でもお聞かせください。私たちが3Dプリントの可能性の限界を押し広げ続けるのは、皆様のおかげです。

みなさん、印刷を楽しんでください!

マーク創設者

シラヤテック

2 コメント

Tom

Tom

Btw I use Chitubox 2.0 for slicing. For ’’older’’ resin printer users: just import the resin settings.cfg into old chitubox and then manually type the corresponding Tough settings in chitubox 2.0. (Chitubox 2.0 only lets you import cfgx files so you can’t import the cfg directly)

Tom

Tom

Honestly, tough navy grey is way better than I thought it would be. Regular navy grey already had amazing detail, but it was way too brittle. Small parts would snap off super easily, which sucked for minis. I thought the tough version would just be a poor mans Tenacious mix with some marketing slapped on, but nope. I can bend the sword from the Cones of Calibration v3 all the way and it is very flexible and doesn’t breal. And I can easily bend it the other way as well and then pretty much make it completely straight again. In my country it is only 3 euro’s more expensive than navy grey. I am using a Mars 3 Pro and the standard Tough Navy Grey settings provided by Sirayatech.
Just wanted to make this comment for anyone still on the fence like I was. This is not a paid comment or bot shit, I really think it’s that good. (please send me some free bottles of tough navy grey though siraya;))

コメントを残す