Tenacious Easy Grey TDS
1. Product Introduction
Tenacious Easy Grey - Flexible Model Resin
- Key Features
- Enhanced Printability: Tenacious Easy Grey resin exhibits a lower viscosity than the 65D Tenacious Resin, streamlining the printing process.
- Precision and Clarity in Details: Tenacious Easy Grey is optimized for capturing intricate details and delivering high-resolution prints, making them stand out with exceptional clarity and quality.
- Specific Design Attributes: To reduce the difficulty of printing, Easy Grey retains a little flexibility and improves detail definition. Ensure that both printing experts and novices can get excellent detail output.
- Not for Mixing, designed exclusively for direct use in model printing.
- Application
- Rapid prototyping
- Miniature models
- Art and Sculptures
- Mechanical Parts and Components
Check out more details about Flexible model resin Tenacious Easy Grey here
2. Property Data
Mechanical Properties | Measure | Method |
Tensile Stress at Yield | 32 | ASTM D638 |
Tensile Stress at Break | 34 | ASTM D638 |
Young’s Modulus | 950 | ASTM D638 |
Elongation at Break | 55 | ASTM D638 |
Flexural Modulus | 1750 | ASTM D790 |
HDT | 60 | 0.455 MPa |
IZOD Impact (Notched) J/m | 46 | |
Shore Hardness (D) | 73 | |
Solid Density | 1.15 | |
Water Absorption | 2% | 24hr |
Liquid Properties | ||
Viscosity | 250 | 25°C (77°F) |
Liquid Density | 1.1 |
3. Work Flow
- Print setting
Tenacious Easy Grey is a prototyping resin material that balances flexibility and strength. It is widely compatible with MSLA/LCD 3D printers. It can also print on some 405mm SLA/DLP printers if you have access to exposure controls.
To achieve optimal results with Tenacious Easy Grey resin, you need to use the appropriate slicer profiles for your printer model and software. You can download the printers' profiles for Chitubox and Lychee slicers here.
Download Siraya Tech V5 test model for free and start printing
- Clean
- Cleaning Tools: Use a brush with hair (like a painter's brush) to remove excess resin from the printed part.
- Cleaning Solution: Preferably use 95% concentrated Ethanol or Isopropyl Alcohol (IPA) for cleaning. Methanol can be used too, but ensure it's acetone-free.
- Cleaning Duration: Avoid submerging parts in alcohol for over 30 seconds. Clean for 2-3 minutes in total.
- Drying Process: Use a hairdryer or air blower to dry the parts after cleaning. Repeat the cleaning and drying process several times for complex parts with many cavities.
- Final Check: Touch the dried surface of the part to check for stickiness. If it's still sticky, wash and dry again.
- Post Curing
- Please note before curing: Make sure resin is completely cleaned off and there is no alcohol left on the print before curing.
- Curing Tips: Curing by submerging objects in water will significantly increase curing efficiency.
- Curing time: Tenacious reached its optimal strength when the printed part is post-cured with UV after cleaning. Use 395-405nm UV light and cure for about 5 minutes. The larger the model, the curing time is longer.
Download the PDF file of Tenacious Easy Grey TDS
View Tenacious Easy Grey user manual