Simple Water Washable V2 TDS
1. Product Introduction
Simple Grey/Aqua Gray V2 - Water Washable Resin
- Features of Simple V2 water-washable resin
- Easy Clean & Low Odor: The latest low-viscosity washable
formula ensures low odor and simple cleaning. - Optimized performance, efficient printing: Upgraded formula
ensures durability and high-quality details, resistant to long-term
water soaking. - High Precision and Excellent Details: Achieves low volumetric
shrinkage, resulting in smooth surfaces and high resolution. - Highly Compatible & Versatile: Highly compatible with our
platinum silicone and with MSLA, LCD, and DLP 3D printers.
- Application
- Model making: Excellent details to produce high-quality
models. - Applicable to Large printers: Low pull force makes it
easy to handle even large printers. - Educational purposes: Saves cleaning costs and has low
odor, suitable for educational projects. - High-speed printing: Low viscosity allows for fast
printing.
Check out more details about Water Washable resin - Simple V2 here
2. Property Data
| Tensile Stress at Yield (Mpa) | 29 | ASTM D638 |
| Tensile Stress at Break (MPa) | 27 | ASTM D638 |
| Young’s Modulus (MPa) | 750 | ASTM D638 |
| Elongation at Break(%) | 10 | ASTM D638 |
| Flexural Modulus (Mpa) | 950 | ASTM D790 |
| Flexural Stress at Yield (MPa) | - | ASTM D790 |
| Flexural Strain at Break(MPa) | - | ASTM D790 |
| Other Properties (Method) | Measure | |
| HDT at 0.455 MPa | 60 | |
| IZOD Impact (Notched) J/m | 18 | |
| Shore Hardness (D) | 78D | |
| Solid Density g/cm3 | 1.2 | |
| Water Absorption (24hr) | 2% | |
| Biocompatibility | Not Tested | 10993-10/5 |
| Liquid Properties | Measure | |
| Viscosity CPS @ 25°C (77°F) | 170 | 25°C (77°F) |
| Liquid Density g/mL | 1.1 |
3. Work Flow
- Print setting
Simple - water washable resin is an affordable, easy-to-print, and clean general
application resin. It is specially designed for MSLA/LCD printers yet and is ideal forlarge format printers and new resin printer users.
To achieve optimal results with Simple V2 resin, you need to use the appropriate slicer profiles for your printer model and software. You can download the printers' profiles for Chitubox and Lychee slicers here.
Download Siraya Tech V5 test model for free and start printing
- Clean
- Use a painter brush (or any brush made with hair) to remove excess resins on the printed part.
- Use 15% alcohol or IPA to clean (15% is preferred. Simple resin can also wash with water). Some form of methanol should work but make sure it does not contain acetone.
- Simple Resin is easily dissolved by water, so do not submerge the parts in alcohol or water for more than 20s. Clean it several times for a total of 2-3 minutes.
- After cleaning, remove alcohol as soon as possible with a hair dryer or air blower.
- For complex parts with lots of cavities, it may be a good idea to clean/dry multiple times.
- You can check by touching the dried surface of the part to see if it is still sticky. If the dried surface is still sticky, wash some more and dry again.
- Tips
- Make sure Simple Resin's model dries completely before post-curing, or the residual water may lead to cracks.
- Quickly drying print is essential for Simple - water washable resin. Do not leave it in the sun to dry. Use a hairdryer.
- How to get 15% alcohol: 1 part 90% alcohol + 5 part water.
- Post Curing
- Make sure the resin is completely cleaned off and there is no alcohol left (it needs to be dry) on the print before curing. Failure to dry before curing may lead to cracks.
- Simple reached its optimal strength when the printed part was post-cured with UV after cleaning. Use 395-405nm UV light and cure for about 1-2 minutes.
Download the PDF file of Simple V2 TDS
View Simple V2 user manual