Flexible resin Tenacious Clear and Obsidian Black TDS
1. Product Introduction
Tenacious Clear and Obsidian Black 65D hardness Flexible Resin
- Key Features
- Highly versatile and durable 3D printing resin that offers excellent impact resistance, flexibility, and toughness.
- Has a high polymer content, which contributes to its outstanding mechanical properties and adds significant toughness and durability to a part.
- Thin objects printed in Tenacious can be bent 180 degrees without shattering, while thicker objects show great strength and toughness, especially.
- It can be mixed with other resins to increase the toughness of other resins.
- Application
- Impact-resistant engineering applications
- Flexible functional parts
- O-rings and gaskets
- Blend with other resins to improve performance
Check out more details about 65D Flexible Resin Tenacious Clear and Obsidian Black here
Note: 65D hardness flexible resin will become slightly harder after curing. It will also gradually harden after absorbing daily UV light for a long time.
2. Property Data
| Mechanical Properties | Measure | Method |
| Tensile Stress at Yield | 30 | ASTM D638 |
| Tensile Stress at Break | 28 | ASTM D638 |
| Young’s Modulus | 800 | ASTM D638 |
| Elongation at Break | 70 | ASTM D638 |
| Flexural Modulus | 770 | ASTM D790 |
| HDT | 55 | 0.455 MPa |
| IZOD Impact (Notched) J | 57 | - |
| Shore Hardness (D) | 65 | - |
| Solid Density | 1.15 | - |
| Water Absorption | 2% | 24hr |
| Liquid Properties | ||
| Viscosity | 560 | 25°C (77°F) |
| Liquid Density | 1.1 |
3. Work Flow
- Print setting
Tenacious Resin is a flexible resin material that is widely compatible with MSLA/LCD 3D printers. It can also print on some 405mm SLA/DLP printers if you can access exposure controls.
To achieve optimal results with Tenacious Flexible resin, you need to use the appropriate slicer profiles for your printer model and software. You can download the slicer profiles for Chitubox and Lychee slicers here
Download Siraya Tech V5 test model for free and start printing
- Clean
- Use a painter brush (or any brush made with hair) to remove excess resins from the printed part.
- Use 95% concentrated Ethanol (preferred) or IPA to clean. Some forms of methanol should work but make sure they do not contain acetone.
- After 2-3 minutes of cleaning action, remove the alcohol with a hair dryer or air blower.
- For complex parts with lots of cavities, it may be a good idea to clean and dry them multiple times.
- Check the dried surface of the part by touching it to see if it is still sticky. If the dried surface is still sticky, wash it again and dry it again.
- Post Curing
Tenacious reaches its optimal strength when the printed part is post-cured with UV after cleaning.
- Use 395-405nm UV light and cure for about 25 minutes.
- Make sure the resin is completely cleaned off and there is no alcohol left on the print before curing.
- Curing by submerging the object in water will significantly increase curing efficiency.
Download the PDF file of Tenacious Clear and Obsidian Black TDS