Fast Mecha White TDS - ABS-like scratch-resistant resin
1. Product Introduction
- Key Features
- Fast Printing and Curing
- Non-scratch, ideal for joints
- Superb solid matte white color with high resolution
- Great Resolution and Surface Finish
- Low Odor and Easy to Clean
- Application:
- Joints doll
- Gears (mixed with Tenacious at 20%)
- Model Making
Find ABS-like scratch-resistant resin - Fast Mecha White here
2. Property Data
| Mechanical Properties | Measure | Method |
| Tensile Stress at Yield | 32 | ASTM D638 |
| Tensile Stress at Break | 30 | ASTM D638 |
| Young’s Modulus | 1050 | ASTM D638 |
| Elongation at Break | 6 | ASTM D638 |
| Flexural Modulus | 1300 | ASTM D790 |
| HDT | 70 | 0.455 MPa |
| IZOD Impact (Notched) J | 24 | |
| Shore Hardness D | 70 | |
| Solid Density | 1.25 | |
| Water Absorption | 2% | 24hr |
| Liquid Properties | ||
| Viscosity | 140 | 25°C (77°F) |
| Liquid Density | 1.15 |
3. Work Flow
- Printing
Fast Mecha White Resin is a high-quality 3D printing material that offers exceptional ease of use and sandability. Specifically optimized for LCD/DLP printing, it offers outstanding results for printing tabletop models to industrial parts, especially suitable for small and half-length models.
Fast-Mecha preserves the non-brittleness and easy printing of Fast resin while having a low friction non-scratch.
It requires 25% exposure than other Fast Resin.
To achieve optimal results with Fast Mecha White Resin, you need to use the appropriate slicer profiles for your printer model and software. You can download the slicer profiles for Chitubox and Lychee slicers from this link: Download Fast Meche Resin profile here
Download Siraya Tech V5 Test model and start printing now
- Clean
- Use a brush to remove excess resin, clean with 95% ethanol or IPA (avoid acetone).
- After 2-3 minutes, remove alcohol with hair dryer or air blower. Clean/dry multiple times for complex parts.
- Check the dry surface for stickiness. If still sticky, wash and dry again.
- Post Curing
- Fast Mecha resin reaches optimal strength when post-cured with 395-405nm UV light for 1-2 minutes.
- Ensure resin is completely cleaned and dry before curing.
- Fully dry Fast Mecha prints before post-curing. No need to use the water submersion technique
More information：
Check out Fast Mecha White User manual
Download Fast Mecha White TDS PDF version