*Select your shipping country first to see available options. Limit 12kg per order.
-
Build Resin Description
-
Print Display
-
Notes
What makes Build different than common model resins is that not only it is not brittle with some impact resistance.
Minimal warping
Build resin has fewer shrinks and warps than normal model resin, which makes it much more dimensionally accurate. (Hence the name Build) This is important for applications that require accuracy. For model makers with model/mold fitting needs, this is critical.
Tappable to create threaded holes
The best unique feature of Build is that it is tappable by a screw and this is possible because Build has the unique combination of hardness and flexibility to handle the tapping process without cracking while preserving the grooves on the tapped holes. It is an excellent resin for making fitted parts, like casings for electronics.
High Precision and Resolution
In addition to low warpage and tappable, Build's resolution is also excellent, and details are clearly visible on model prints.
Smooth surface
Build resin has fewer shrinks and warps than normal model resin, which makes it much more dimensionally accurate. (Hence the name Build) This is important for applications that require accuracy. For model makers with model/mold fitting needs, this is critical.
Picture by Djay from IG
Excellent details
The best unique feature of Build is that it is tappable by a screw and this is possible because Build has the unique combination of hardness and flexibility to handle the tapping process without cracking while preserving the grooves on the tapped holes. It is an excellent resin for making fitted parts, like casings for electronics.
Crystal like appearance
In addition to low warpage and tappable, Build's resolution is also excellent, and details are clearly visible on model prints.
Reach and ROSH Certification: Click here to view
Model By J3d Tech, find the model here: Download model
Picture below By Djay, view more here: Djay-3d
Model below By J3d Tech, find the model here: Download model
View user guide: Click here
Download print settings: Click here
Check MSDS here: Click here
View REACH and RoSH certification: Click here
View RoSH certification: Click here
Recommend best support settings:
We recommend a medium preset support setting in chitubox for smaller prints. Heavy support for large prints on large printers
If you don't use chitubox, at least download a copy and see the detailed settings for each preset and copy them over to your software of choice
Cleaning:
Use a painter brush (or any brush made with hair) to remove excess resins on the printed part use 95% concentrated Ethanol (preferred) or IPA to clean. Some form of methanol should work but make sure it does not contain acetone.
After 2-3 minutes of cleaning action, remove alcohol with a hair dryer or air blower. For the complex parts with lots of cavities, it may be a good idea to clean/dry multiple times.
Users can check by touching the dry surface of the part to see if it is still sticky. If the dry surface is still sticky, wash some more and dry again.
Post Curing:
Build reached its optimal strength when the printed part was post-cured with UV after cleaning. Use 395-405nm UV light and cure for about 1-2 minutes.
Make sure the resin is completely cleaned off and there is no alcohol left (it needs to be dry) on the print before curing.
It is important to dry the print made by Build completely before post-curing.
There is no need to use the "submerge in water" technique.
Mechanical Properties
Shore D 85
Tensile Strength 50 Mpa
Young’s Modulus 1050Mpa
Elongation At Break: 8%
Viscosity: 140 CPS
Heat Deflection Temperature: 74C
YOU MAY ALSO LIKE
Note: Please select the location before adding to the shopping cart, please refresh the page before checkout.