Siraya Tech Blu Lava Grey – Ultra-Fast Printing and PC-like Strength Resin for Engineering Prints

Introduction

Looking for a resin that combines rock-solid durability with blazing-fast print speeds? Siraya Tech Blu Lava Grey is your go-to solution. Designed for creators who demand both mechanical performance and efficiency, this advanced engineering resin delivers the toughness of PC-like materials and prints fast—without compromise.

Why Choose Blu Lava Grey?

  • PC-Like Strength and Durability
With a Young’s Modulus of 2500 MPa and Shore Hardness of 87D, Blu Lava Grey stands up to serious mechanical demands. It’s perfect for jigs, brackets, housings, and other load-bearing components.
  • Tappable and Crack-Free
This resin can be tapped directly after printing—yes, that means you can thread holes without worrying about layer cracks or failures.
  • Optimized for Fast Printing
What makes Blu Lava Grey stand out is speed. On the Saturn 4 Ultra, you can print at 50µm layer height with just 3 seconds exposure per layer. For a resin with such high stiffness, this is remarkably fast—outpacing many resins with similar viscosity and mechanical properties.

  • High Resolution with Smooth Finish
Prints come out with a sleek, professional surface finish and incredible dimensional accuracy—ready for display or functional use straight off the build plate.
  • Broad Compatibility
Works with most 405nm LCD and DLP 3D printers. From hobbyists to industrial users, Lava Grey fits right into your workflow.

  • Biocompatibility Tested
Passed ISO 10993-10 testing for irritation and skin sensitization—suitable for prototyping wearable devices or skin-contact components.

Ideal Applications

  • Functional mechanical prototypes
  • End-use parts and housings
  • Jigs, fixtures, and tooling aids
  • Tappable brackets and mounting components
  • Small-batch production runs
Siraya Tech Blu Lava Grey empowers you to print smarter, stronger, and faster.

Resources & Downloads

Resource Type
Link
🛒 View Blu Lava Grey
📘 User Manual
📄 TDS (Technical Data Sheet)
⚙️ Print Settings
3d resin and silicone tips

Leave a comment