ABS Filament 1.75mm

8 products

Showing 1 - 8 of 8 products

ABS filament 1.75mm is the workhorse of functional 3D printing. It prints easier than advanced engineering materials, handles post-processing well, and delivers parts that are noticeably tougher than PLA. Siraya Tech's 1.75mm ABS range covers everything from standard reinforced ABS to carbon fiber and glass fiber versions that push the material into genuine engineering territory.

What Is ABS Filament

ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic used across injection molding, automotive parts, and consumer electronics. In 3D printing it has been the standard for functional prototypes and end-use parts for years because it offers a practical balance of printability, toughness, and post-processability.

Standard ABS prints at around 230C to 250C on a heated bed. It warps less than some advanced materials and responds well to acetone vapor smoothing, sanding, and painting. Reinforced ABS grades take those base properties and improve them with fiber additives, making the material significantly stiffer and more dimensionally stable.

Stronger and more impact-resistant than PLA, especially at lower temperatures
Responds to acetone vapor smoothing for smooth, glossy finishes
Sanded and painted easily for post-processed parts
Reinforced grades with carbon or glass fiber offer stiffness comparable to some metals
1.75mm diameter works with most desktop FDM printers

ABS vs. PLA: Which Should You Choose

PLA is easier to print and works on almost any machine without a heated chamber. ABS produces tougher parts with better thermal resistance, but it requires a heated bed and benefits from an enclosure to prevent warping. For most functional prototyping and end-use parts, ABS is the stronger choice.

Strength and impact resistance: ABS handles impacts better and does not become brittle over time the way PLA can. For parts that take knocks or are used outdoors, ABS holds up longer.
Temperature resistance: ABS softens around 100C. PLA starts deforming around 60C. If your part will be in a warm environment, ABS is the better choice.
Post-processing: ABS responds to acetone vapor smoothing, sanding, and painting. PLA can be sanded but does not smooth with acetone. If a smooth cosmetic finish matters, ABS is the way to go.
Printability: PLA wins here. It adheres to most beds without issues and does not emit strong fumes. ABS requires more careful bed adhesion and ventilation, but the mechanical performance payoff is significant.
Reinforcement matters: Carbon fiber or glass fiber reinforced ABS takes the toughness of ABS and adds stiffness and dimensional stability on top. A CF-ABS bracket can replace machined aluminum in many applications.

When to Choose Reinforced ABS Over Standard ABS

Standard ABS handles most prototyping and functional parts well. Reinforced grades make sense when you need more from the material without moving to a completely different polymer family.

Structural load: Carbon fiber ABS and glass fiber ABS have significantly higher flexural modulus than standard ABS. If the part bears a load, reinforced grades resist deformation better.
Dimensional precision: Fiber reinforcement reduces thermal expansion during printing and in warm environments. Parts hold tighter tolerances with reinforced grades.
Weight reduction: Carbon fiber reinforcement adds stiffness without the weight penalty of standard ABS. Drone frames and automotive brackets benefit from this combination.
Extended service temperature: ABS-GF at 93C HDT and ABS HT HF at 101C HDT both outperform standard ABS in warm environments like electronics enclosures or dashboards.

How to Print ABS Filament Successfully

Use a heated bed at 90C to 110C. ABS shrinks as it cools, so a warm bed prevents the first layers from lifting or warping before the print is complete.

Print inside an enclosure or closed chamber. Drafts and temperature swings cause ABS to warp and split. A simple cardboard box around the printer makes a noticeable difference.

Dry the filament before printing. ABS absorbs moisture from the air, which causes bubbles, poor layer bonding, and surface defects. A dryer box during printing or vacuum-sealed storage between uses solves this.

Use adhesion aids on the build plate. ABS sticks best to surfaces like PEI, Kapton tape, or a glue stick on glass. A clean, properly leveled bed is the single most important factor in successful ABS prints.

Allow the print to cool slowly before removing it. Accelerating cooling causes thermal stress that can crack or warp the part. Letting the bed cool to near room temperature before removal gives the best results.

Explore Related Collections

Strong Filament Heat Resistant Filament Carbon Fiber Filament Industrial Filament Fibreheart Engineering Accessories

Frequently Asked Questions

What is the best ABS filament 1.75mm for functional parts?

Fibreheart ABS-CF Core is the best all-around choice for functional ABS parts. The core-concentrated carbon fiber design gives you the toughness of ABS with significantly improved stiffness and dimensional stability, while the reduced nozzle wear makes it more practical than fully filled carbon fiber filaments. For maximum temperature resistance within the ABS family, ABS HT HF at 101C HDT handles warmer environments than standard ABS.

Can I print ABS on a printer without an enclosure?

You can, but it is more prone to warping, splitting, and layer adhesion failures. ABS contracts as it cools, and any draft or temperature fluctuation accelerates that process. An enclosure traps heat and keeps the temperature around the print stable. Even a simple cardboard box over the printer makes a meaningful difference. Without it, stick to small parts with good bed adhesion.

Do I need a hardened nozzle for ABS filament?

For standard ABS and ABS-GF, a standard brass nozzle works fine. For carbon fiber reinforced ABS, a hardened steel or tungsten carbide nozzle is strongly recommended. Carbon fibers are abrasive and will wear through a brass nozzle quickly, causing inconsistent extrusion and diameter deviations over time.

What is the difference between ABS-CF and ABS-GF?

Carbon fiber reinforcement makes the filament stiffer and lighter, with a lower thermal expansion coefficient. Glass fiber reinforcement improves stiffness and HDT but is less dramatic in its effect on weight and thermal expansion. ABS-GF is easier to print than ABS-CF and works with standard brass nozzles. ABS-CF gives you the highest stiffness-to-weight ratio and is better for weight-sensitive applications like drone frames and brackets.

Can ABS filament be smoothed with acetone?

Yes. ABS dissolves in acetone, and controlled exposure smooths the surface to a glossy finish. This works well for display parts and cosplay props. Note that ABS HT HF has a higher temperature resistance than standard ABS, which can make it slightly less responsive to acetone smoothing, but it still works with longer exposure times. Always smooth in a well-ventilated area.

What is HDT and why does it matter for ABS filament?

HDT stands for Heat Deflection Temperature. It is the temperature at which a material deforms under a specific load. Standard ABS softens around 90C to 95C. ABS-GF at 93C HDT and ABS HT HF at 101C HDT both hold their shape in warmer environments. If your part will be used in a warm space, near electronics that generate heat, or in direct sunlight, the higher HDT of reinforced ABS grades matters.

Showing 1 - 8 of 8 products