フィルター

在庫あり (3)
在庫切れ (0)

Heat Resistant Silicone

3 製品

3 製品の1 - 3を表示しています。

Heat-resistant silicone has become one of the most practical materials in modern fabrication. Whether you are making molds for resin 3D printing, casting parts in pewter or low-melt metals, or working on projects that demand durability under high temperatures, the right silicone makes all the difference.

Siraya Tech Defiant Series platinum silicones are specifically formulated for use with 3D printed parts, resisting the curing inhibition that breaks down lesser silicones when they contact UV resins.

What Is Heat-Resistant Silicone?

Heat-resistant silicone is a platinum-cure elastomer that maintains its properties from below freezing to over 200°C. Unlike tin-cure silicones, platinum-cure variants offer superior resistance to thermal aging and physical compression.

In fabrication, your mold must survive the exothermic heat of curing resins and molten metals. If the silicone fails, the mold deforms or degrades. Siraya Tech Defiant silicones are engineered to solve this problem while maintaining compatibility with UV resins.

Platinum Cure vs. Tin Cure Silicones

Platinum cure (addition cure): High accuracy, low shrinkage, and strong heat resistance. Dimensionally stable and resistant to cure inhibition.
Tin cure (condensation cure): More affordable but prone to shrinkage and less heat-resistant. Often suffers from inhibition with 3D printed resins.

Siraya Tech Defiant Series

Co-developed with professional prop makers, the Defiant Series allows you to pour silicone directly over 3D printed parts without treating or sealing the surface first.

Defiant 10 (10A Shore): Soft and flexible for delicate or complex geometry.
Defiant 15 (15A Shore): Mid-range flexibility; a great general-purpose choice.
Defiant 25 (25A Shore): Firmer for structural strength or high-temperature metal casting.

How to Use Defiant Silicone

Prepare your 3D printed master. Clean it thoroughly to remove any uncured resin, isopropyl alcohol residue, or dust. A short UV post-cure is recommended.

Mix the silicone according to the instructions on the product. Defiant silicones are two-part systems. Measure by weight at the recommended ratio for your hardness level.

De-air the mixed silicone using a vacuum chamber if available. If not, mix slowly and let it sit for a few minutes to allow large air bubbles to escape before pouring.

Pour the silicone slowly over your master part. Start from the lowest point and let it flow up and over the geometry. This reduces air entrapment in fine details.

Allow the silicone to cure fully. Cure time depends on the hardness level and ambient temperature. Do not rush the cure, especially for thicker mold sections.

Once fully cured, carefully remove the master from the mold. Defiant silicones are flexible enough to release complex geometry without damage to the pattern.

Heat Resistance and Durability

The Defiant Series maintains structural integrity across a wide thermal range. This is critical when casting hot materials like pewter or urethane.

Defiant 25 is specifically suited for high-heat applications, resisting deformation even after repeated thermal cycles.

Why Siraya Tech Defiant for Heat-Resistant Silicone?

Siraya Tech built the Defiant Series out of real fabrication needs. Professional prop makers and product designers who use 3D printed masters daily needed a silicone that could be poured directly over their prints without fail.

The result is a platinum-cure line with genuine resistance to cure inhibition and high heat performance across three Shore hardness options.

Whether you are casting pewter rings, making resin copy molds, or building production tools for urethane parts, Defiant gives you a silicone that works with your 3D printed geometry rather than against it.

Shop Related Collections

Silicone Silicone Rubber Heat Resistant Resin Castable Resin Engineering Resin Accessories

Frequently Asked Questions

What makes heat-resistant silicone different from standard silicone?

Heat-resistant silicone uses platinum-cure chemistry rather than tin-cure chemistry. Platinum cure silicones maintain their mechanical properties across a much wider temperature range, from well below freezing to over 200 degrees Celsius. They also resist cure inhibition when poured over 3D printed surfaces, which is the main limitation of standard tin-cure silicones in fabrication workflows.

Can I pour silicone directly over a 3D printed part?

It depends on the silicone. Standard tin-cure silicones often suffer cure inhibition when poured over UV resin 3D printed surfaces, leaving a tacky layer at the interface. Siraya Tech Defiant Series platinum silicones are specifically formulated to resist this inhibition, so you can pour them directly over your 3D printed master without a sealer or barrier layer. Always verify your 3D printed master is fully post-cured before pouring.

What Shore hardness should I choose for mold making?

Use Defiant 10 or 15 for delicate or intricate 3D printed masters where the mold needs to flex during demolding. Use Defiant 15 for general-purpose mold making. Use Defiant 25 for high-heat applications like metal casting, or when you need a more rigid mold for production use.

Is Defiant silicone food safe?

Yes. Once fully cured according to the product instructions, Defiant silicones are food-safe. This makes them suitable for making molds for edible applications like chocolate, soap, and candy casting, subject to following safe handling and curing procedures.

How do I mix and de-air platinum silicone?

Mix the two parts by weight at the recommended ratio. De-air using a vacuum chamber if available. If you do not have a vacuum chamber, mix slowly and let the mixture rest for a few minutes to allow large air bubbles to escape before pouring. Pour slowly from the lowest point of your mold frame to reduce air entrapment in fine details.

What temperature can Defiant silicone withstand?

Defiant Series platinum silicones maintain their properties across a wide temperature range. Defiant 25, the firmest formulation, is specifically designed for high-heat applications like pewter casting where mold temperatures can reach 230 to 250 degrees Celsius. The softer grades offer good heat resistance for standard resin casting and moderate-temperature applications.

3 製品の1 - 3を表示しています。

フィルター

在庫あり (3)
在庫切れ (0)