1. Introduction
The Saturn 4 Ultra printer and Siraya Tech Fast Navy Grey resin make an excellent pair for speed and quality. With Saturn 4 Ultra's tilting mechanism, travel time is significantly reduced, while Siraya Tech Fast Navy Grey resin ensures minimal layer curing time and low peel forces.
2. Printer Features
The Saturn 4 Ultra's unique tilting build plate reduces the mechanical time required between layers. This allows for smoother and faster layer transitions, minimizing travel time, a critical factor in large or detailed prints like the Wukong model.
3. Resin Properties
Siraya Tech Fast Navy Grey resin is specially designed for high-speed curing and low peel force. Its fast curing properties (as low as 2 seconds per layer at 50 µm) mean that almost no waiting time is required between layers, leading to a total layer time of just 4.4 seconds. This resin balances speed and detail well, producing durable, high-resolution prints.
Check out ABS-like Fast resin to start high speed printing！
4. Saturn 4 Ultra Special High-Speed Profile for Fast Navy Grey
Using a custom high-speed printing profile, you can achieve impressive results on the Wukong model. For example, printing at 50 µm layer height with just 2-second exposure times and a total layer cycle of 4.4 seconds ensures that models are printed at record speed without sacrificing detail or quality. This makes it an ideal setup for demanding, high-detail projects.
Download Saturn 4 Ultra Special High-Speed Profile for ABS-like Fast Resin here！
Saturn 4 Ultra Special High-Speed setting for Fast Grey 50um：
| Resin | Fast Grey ＆ Fast Tough Grey | Fast Navy Grey ＆ Fast Tough Navy Grey |
| Layer Height | 50um | 50um |
| Bottom Layer Count | 6 | 5 |
| Exposure Time | 2.1 | 2.5 |
| Bottom Exposure Time | 25 | 45 |
| Transition Layer Count | 5 | 5 |
| Transition Type | Linear | Linear |
| Transition Layer Interval Time Difference | 3.82 | 7.08 |
| Waiting Mode During Printing | Resting Time | Resting Time |
| Rest Time Before Release | 0 | 0 |
| Rest Time After Release | 0 | 0 |
| Rest Time After Retract | 0 | 0 |
Saturn 4 Ultra Special High-Speed setting for Fast Grey 100um：
| Resin | Fast Grey ＆ Fast Tough Grey | Fast Navy Grey ＆ Fast Tough Navy Grey |
| Layer Height | 100um | 100um - in testing |
| Bottom Layer Count | 5 | |
| Exposure Time | 2.5 | |
| Bottom Exposure Time | 32 | |
| Transition Layer Count | 5 | |
| Transition Type | Linear | |
| Transition Layer Interval Time Difference | 4.92 | |
| Waiting Mode During Printing | Resting Time | |
| Rest Time Before Release | 0 | |
| Rest Time After Release | 0 | |
| Rest Time After Retract | 0 |
5. Conclusion
The combination of Saturn 4 Ultra's hardware and Siraya Tech Fast Navy Grey resin is perfect for large models that require both speed and precision. The tilting build plate reduces time between layers, while the Fast resin's rapid curing characteristics make it perfect for achieving consistent, high-quality results in a fraction of the time.
This setup is highly recommended for hobbyists and professionals looking to push the limits of 3D printing speed and efficiency, especially on detailed models like Wukong.
