Anycubic Kobra 3 Max Filament

18 products

Showing 1 - 18 of 18 products

The right Anycubic Kobra 3 Max filament is what keeps a 20-hour print from failing at hour 18.

Siraya Tech makes premium 1.75 mm filament tuned for the Kobra 3 Max's larger build volume, 300°C hotend, and ACE Pro multi-color system. Every spool is formulated in-house, sealed against moisture, and built to stay consistent across long, large-format prints.

Get clean dimensional accuracy, strong layer adhesion, and zero mid-print extrusion failures on cosplay armor, props, and oversized functional parts.

Built for Large-Format Multi-Color Printing: Tuned for the Kobra 3 Max's expanded build area, 300°C hotend, 110°C bed, and ACE Pro feed system. Reliable across overnight prints and complex multi-color projects.

Filament That Survives Long, Large Prints on the Kobra 3 Max

Big prints are unforgiving. One bad section of filament and you scrap 18 hours of work. Our spools are engineered to stay consistent end to end.

Tight ±0.02 mm diameter tolerance — keeps extrusion stable across every gram of an oversized spool.
Vacuum-sealed aluminum packaging — every spool ships with desiccant to prevent moisture absorption before use.
High volumetric flow — formulated for the Kobra 3 Max's high-speed extrusion without under-extrusion on tall walls.
ACE Pro compatible — clean feeding for multi-color large-format prints with up to 8 colors.

Pick the Right Material for Large Kobra 3 Max Builds

Large prints highlight every weakness in a filament. Match the material to the part you are printing and the Kobra 3 Max delivers on every kind of project.

Material	Best For	Multi-Color	Key Strength
PLA	Cosplay shells, props, art pieces	Yes	Easy at scale, sharp detail
PETG	Large enclosures, outdoor parts	Yes	Tough, weatherproof, low odor
Flex TPU	Oversized gaskets, foamed insoles	No	Flexible, impact absorbing
PETG-CF HF	Large brackets, drone frames	Yes	Stiff, low-warp on big footprints

PLA for Cosplay and Display-Scale Prints

The Kobra 3 Max was built for parts you cannot fit on smaller printers. Our PLA prints cleanly at speed and stays dimensionally accurate across full-helmet builds and prop replicas.

PETG for Large Functional Parts

PETG holds up where PLA gets brittle. It is the right choice for oversized brackets, large enclosures, outdoor parts, and anything that needs to survive temperature swings or impact loads.

Flexible TPU on the Kobra 3 Max

The Kobra 3 Max direct drive handles flexible filament at any size, as long as you slow down and minimize retraction. Our Flex TPU Air 65A-82A foaming blend opens up lightweight, large-format wearables and protective parts with tunable hardness.

PETG-CF HF for Stiff Large-Format Engineering

Big prints sag and warp without reinforcement. PETG-CF HF cuts both issues by adding chopped carbon fiber, with high-flow chemistry that runs fast even on the Kobra 3 Max's wide bed.

Note: Always use a hardened steel nozzle when printing PETG-CF on the Kobra 3 Max.

Why Professional Makers Choose Siraya Tech

We formulate and manufacture every spool in-house. Nothing white-labeled, nothing repackaged.

Every filament is tested on real production printers, including large-format CoreXY-class machines, so your overnight prints stay consistent from start to finish.

Featured Filaments for the Anycubic Kobra 3 Max

Frequently Asked Questions

What filament works with the Anycubic Kobra 3 Max?

The Kobra 3 Max supports PLA, PETG, and TPU. The 300°C hotend and 110°C bed cover those materials reliably. ABS and ASA print, but warp risks rise on large parts without an enclosure.

Can the Kobra 3 Max print large TPU parts?

Yes. The direct drive extruder handles flexible filament at any size. Print at 20 to 50 mm/s with minimal retraction to prevent under-extrusion across long flex prints.

Is PETG-CF a good choice for the Kobra 3 Max?

Yes. PETG-CF is one of the best options for large structural parts on the Kobra 3 Max. The carbon fiber reduces sag and warping across wide prints. Use a hardened steel nozzle.

Does the Kobra 3 Max need an enclosure?

No. The Kobra 3 Max is an open-frame printer. Stick to materials that print well in open conditions, like PLA, PETG, and TPU.

How long can the Kobra 3 Max print without interruption?

Most Kobra 3 Max users run prints from 12 to 24 hours regularly. Reliability comes down to filament consistency, tight tolerance, dry spools, and clean feed paths.